';

Injection materials

6
separatore


FJP COMPOUND

Thermoplastic resin for denture “elastic”, which for its characteristics, it is confirmed as a good alternative to dentures nylon. Available in the “standard” type and in a “more elastic” type.

FEATURES

  • Quite elastic
  • Semi-transparent
  • Low absorption of liquids
  • No need of drying
  • Good color stability
  • Good accuracy
  • Excellent stability dimensional
  • Easy to finish and be polished by conventional techniques
  • Ability of adhesion to the acrylic resin (with the aid of “Acecril” product)
  • Sterilized at 121 ° C
  • Reusable (if used with the equipment:J-100 Evolution, J-200 Pressing, You and Me, Easy Clasp)

TECHNICAL FEATURES
ELASTIC MODULE from 1800 MPa to 2200 MPa (Rif. ISO 178 )
ABSORPTION Media 1,2 ug/mm ³ (Rif. ISO 10477)
SOLUBILITY Media < 0,1 ug/mm ³ (Rif. ISO 10477)
DON’T CONTAINS MONOMER

5
separatore


TSM ACETAL DENTAL

Technopolymer thermoplastic with a crystal structure, devoid of monomer, indicated in the realization of various prosthetic solutions: aesthetic hooks of partial denture, partial dentures, removable bridges, post-surgical space maintainers, temporary bridges, reinforcing structures for temporaries, stump pins, dies implant, splints, orthodontic retainers, allowing, therefore, to replace the acrylic resins and the metals in different prosthetic solutions.

FEATURES

  • High abrasion resistance
  • Excellent resistance to traction and impact
  • High elastic memory
  • Low thermal conductivity
  • Non-allergenic and non-toxic
  • Excellent aesthetic

TSM Acetal Dental is available in 20 color shades, 17 of them in comparison to the color scale “Life” and three shades of pink colors

TECHNICAL FEATURES
ELASTIC MODULE 3536 MPa (Rif. ISO 178)
ABSORPTION Media 2,4 ug/mm ³ (Rif. ISO 10477)
SOLUBILITY Media < 0,1 ug/mm ³ (Rif. ISO 10477)
DON’T CONTAINS MONOMER

2
separatore


PLASTIC STEEL

Technopolymer reinforced with glass fibers, with very high mechanical characteristics “similar to metals”, it indicated for the production of substructures and abutment pins mono root

Suitable for substructures and / or abutment pins.

FEATURES

  • Absence of monomer
  • Good accuracy
  • Excellent flexural strength
  • For proper processing the product should always be covered
  • Possibility of adhesion to the acrylic resin (with the aid of Acecril product)

TECHNICAL FEATURES
ELASTIC MODULE 14.700 MPa (Rif. ISO 178 )
ABSORPTION Media 11,4 ug/mm ³ (Rif. ISO 10477)
SOLUBILITY : Media < 0,26 ug/mm ³ (Rif. ISO 10477)

2
separatore


FLEXI-J

Thermoplastic polymer based nylon. The combination of its components make it ideal for the production of partial dentures and total “elastic”

Type 1 * more elastic characteristics similar to Valplast (USA)
Type 2 * more elastic characteristics similar to Perflex (Israel)
Type 3 * stiffer characteristics similar to Flexite (USA)

FEATURES

  • Absence of liquid monomer
  • High accuracy
  • The absence of joint hikes
  • Reduced processing times = high productivity
  • Adhesion with the same polymer thanks to the specific primer

TECHNICAL FEATURES
ELASTIC MODULE: Depending on the type from1600 MPa to 2500 MPa ( Rif. ISO 178)
ABSORPTION Depending on the type from 2,9 – 4,1 ug/mm ³ (Rif. ISO 10477)
SOLUBILITY Media < 0,1 ug/mm ³ (Rif. ISO 10477)

4
separatore


THERMO BRIDGE

Thermo Bridge is an acrylic polymer monomer-free, available in white and pink color.

THERMO BRIDGE WHITE

Thermo Bridge belongs to the family of acrylic polymers, it is a special multi-polymer, specially made by Pressing Dental for the production of crowns and temporary bridges.

Provisional is not only for a purely aesthetic reason, but above all functional, so it is indispensable to be designed and realized according to the canons of a definitive prosthesis. For this reason, we believe it is essential to use a product that, in addition to ensuring aesthetics, does not underestimate other determinants such as precision, dimensional stability, low absorption of liquids, color stability, and biocompatibility.

THERMO BRIDGE PINK

Thermo Bridge pink, is a “thermoplastic” polymer based on polymethylmethacrylate. The combination of its components makes this product ideal for producing partial and total prostheses.

FEATURES

– Absence of liquid monomer

– Adhesion with the same polymer

– Adhesion with conventional acrylic resins

– Great dimensional stability

– High precision

– No joint upsets

The reduced processing time allows for high productivity

 

TECHNICAL FEATURES

ELASTIC MODULE 2750 MPa(RifISO 178)

METHYLMETACRYLATE MIGRATION TEST Release mg / dm2 <0.01

ABSORPTION Average <1.0 μg / mm 2

(Ref. ISO 10477)

SOLUBILITY Average 13.74 μ / mm2

(Ref. ISO 10477)

MONOMER CONTENT MMA 0,3%

3
separatore

CORFLEX ORTHODONTIC

Corflex Orthodontic is a synthesis product obtained from a mixture of high molecular weight copolymers of ethylene and vinyl acetate. The association of its components results from the research efforts carried out by Pressing laboratories; these enabled Pressing to produce a thermoplastic material with the ideal features to meet a whole range of requirements, so much so that Corflex-orthodontic has become the first choice product of its kind. Rapid and recurrent mechanic stresses do not cause any cracking in the Corflex-orthodontic; it displays a high degree of flexibility and a rubber-like performance. Its very low water absorption and excellent resistance to acids are further noteworthy features. Corflex-orthodontic is available in a wide colour range, it is so transparent that controls can be carried out even after its placement in the oral cavity. Corflex-orthodontic is widely used to make orthodontic positioning devices, oral devices and gum shields for sport activities.

TECHNICAL FEATURES
ABSORPTION Media, depending on the type from 0,3 -3,2 ug/mm ³ (Rif. ISO 10477)
SOLUBILITY Media depending on the type < 0,2- 1,1 ug/mm ³ (Rif. ISO 10477)
HARDNESS 80 and 60 Shore A