';

Discs

millable

M.H.C. MILLABLE HYBRID COMPOSITE

Acrylic polymer based and nano or micro filled. The acrylic share shows two advantages: superficial adaptation and the possibility to add composites material, the result is a good cohesion between the components.
Use: Thanks to the high flexural strenght, the M.H.C. has been designed to produce single material structure.

6

SMILE CAM MULTILAYERS

3 layers and 5 layers

Micro-filled acrylic disc with the same abrasion resistance of a 3 layers acrylic tooth.
Use: Production of dental crowns and bridges for long term use
Colors : A1 A2 A3 A4 B3 C2 D2
3 layers H 16 mm – 5 layers H 20 mm

denti

SMILE CAM MICRO-FILLED

Micro-filled acrylic discwith the same abrasion resistance of an 3 layers acrilyc tooth.
Thank to his features the product guarantee a long term use (5 years)
Use: Provisional bridges and crowns
Colors: A1 A2 A3 B1. H16mm – H 20 mm

3

SMILE CAM
ENAMEL

Enamel micro-filled disc with the same abrasion resistance of an 3 layers acrilyctooth.
Use: Provisional elements pre-filling
Colors: H 20-S2 enamel 50% – H 20-S4 enamel 100%

4

SMILE CAM RX

Radiopaque disc produced with acrylic polymer loaded with specific fillers to make it visible to X-rays.
Use: surgical guides
H 18 mm

5

SMILE CAM
TOTAL PROTHESIS

PMMA disc with with excellent mechanical resistance.
Use: Total/partial dentures
Colors Pink H 25 mm

9


TSM ACETAL DENTAL COMPOUND

Technopolymer with unique characteristics that allows to alternate rigidity and elasticity depending on the specific requirements. The excellent mechanical properties and the self-lubricating effect makes possible its use in direct contact with metal parts, also decreasing the friction and abrasion.
Use: Partial dentures including hooks, space maintainers, bridges, bars, substructures.
Colors: A – A1- A2-A3 – B1- B2- B3 H 16 mm – 20 mm
Pink color H 25 mm

13


PLASTIC STEEL

Polymer micro filled with a high percentage of glass fibers, in order to significantly increase its mechanical resistance to bending.
Use: Stuctures, substructures, stump pins
Colors: Monochromatic H 15/16 mm

7


SMILE PEEK

Special polymer with good bending strength
Use: Structure, substructures, bars
Colors: Monochromatic H 14 mm – 16mm – 20 mm

8


TITAN SMILE CAM

Medical titanium grade 5, available on request also in grade 2. The product is the same that is used for the production of abutment and final structures for long-term (five years)
The product is available in discs Ø 98,5mm and on request up to H 40 mm

1


SMILE CAM CASTABLE

Castable disc produced entirely with acrylic polymer
Use: Production of structures or substructures destined for the melting process
Colors: Green – Transparent H 14-16-18 mm

master-model


SMILE MASTER MODEL

Castable disc in polyurethane with an excellent mechanical strength and a good dimensional stability
Use: Production of master model
H 12 mm – 14mm – 16 mm – 18mm – 20mm – 22 mm

10


SMILE TEST

(product without CE)

Disc made with a particular formulation of aluminum, that allows a better workability.
Use: The product is particularly suitable for verification tests on complicated structures or on bars before proceeding to the final product
H 12 mm – 18 mm